The thin diameter also creates less drag. Some of these fishing lines are hollow which prevents the line from “digging in” in the reel and is splice able. This line is extremely thin and very strong. We recommend at least 200lb test for shallower application and 450lb for deeper application.The best line we have found so far is Kevlar and/or spectra fishing line. Regardless of which method you decide to use while drifting, there are several common factors to consider:ġ) The line used to deploy the camera system under water is critical. The bottom weight should not exceed 25lbs.ģ) In very heavy current (or tide) or when the movement of the camera must be restricted as much as possible, the combination of the two methods above is suggested.ĭrifting aboard a kayak, or boat remains a very inexpensive to cover a very large area. Fishing tackle stores usually have very large weights up to 50 oz ) This weight is directly attached to the eyebolt with a 40/50lb leader. (weight lifting/scuba diving weights/fishing weights. Instead, the buoy remains stationary with the help of a heavy weight. The longer the anchor line, the greater the buoy’s movement.Ģ) If there is little or no current, an anchor is not used. In a tidal situation, the movement of the buoy is dictated by the scope of the anchor line. If the current is consistent, such as in a river, the buoy and camera system may sway laterally to a certain extent. From the buoy, the VideoFins and housings are hung at the desired depth. There are three options:ġ) In stronger current, an anchor is deployed to hold the buoy in the current. When stationary observation within the mid-or upper water column is desired, a buoy is used. Bury/drive the spike in the seafloor/river bed. Tie the parachute cord with the spike to the bottom eyebolt of the VideoFin. If there is any chance of the housing being swept away, we recommend using a parachute cord (500lb test) and a spike. The current should not hit the camera system broadside without additional anchoring points. Ideally, the housing either faces or follows the prevailing current. The snorkeler/diver can place the kit with the camera housing on the seafloor, pointing the camera system in the desired direction. The camera housings is mounted on a tripod, chum box, cinder block, or a stationary object. This kit can be used for stationary observation, drifting or slow trolling.Īs the name implies, this method is used for passive observation. If you have also purchased the VideoFin- Pro and some of the optional accessories, you will need to decide how you want to deploy it.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |